×
Home Products Project Cases About Us Contact WhatsApp Sales
Home / Products / Product Detail
Sumitomo

Sumitomo CNA-31C Air-Cooled Helium Compressor

ModelCNA-31C

Sumitomo CNA-31C air-cooled helium compressor for compatible SRDK cryocooler systems, including RDK-305D configurations. AC 200 V, 50/60 Hz design with a recommended adsorber replacement interval of 30,000 operating hours. Confirm compatibility before quotation.

  • Photo VerificationProduct photos & identification available for verification
  • Inspection ArrangementsPre-shipment inspection can be arranged where applicable
  • Worldwide SupplyInternational shipping can be arranged

Product Identification

ModelCNA-31C
PlatformSumitomo SRDK Cryocooler Systems
ConditionNewRefurbished
ClassificationMRI Spare Parts
TypeMRI Helium Compressors
Compatible SystemsSelected cryogenic and MRI systems using the Sumitomo CNA-31C helium compressor with compatible RDK-305D cold-head configurations. Compatibility should be confirmed by compressor model, electrical specification, cold-head model and system configuration.
BrandSumitomo

Product Overview

Product Overview The Sumitomo CNA-31C is an air-cooled helium compressor designed for compatible Sumitomo SRDK cryocooler systems. It supplies high-pressure helium gas to the cold head and recompresses the returning helium gas as part of a closed-cycle cryogenic refrigeration system. Product Identification

  • Manufacturer: Sumitomo Heavy Industries
  • Model: CNA-31C
  • Product Type: Helium Compressor / Cryocooler Compressor
  • Cooling Method: Air-Cooled
  • Electrical Supply: AC 200 V, 50 / 60 Hz
  • Phase: Three-Wire + Protective Earth
  • Application: MRI / Cryogenic Systems
  • Condition: Refurbished
  • Standard Warranty: 3 Months

Electrical Specifications

  • Power Line Voltage: AC 200 V, 50 / 60 Hz
  • Maximum Operating Current: 16 A
  • Minimum Power Requirement: 6.5 kVA
  • Recommended Power Capacity: 8.5 kVA
  • Maximum Power Consumption: approximately 4.6 kW at 50 Hz
  • Steady-State Power Consumption: approximately 3.8 kW at 50 Hz
  • Maximum Power Consumption: approximately 5.6 kW at 60 Hz
  • Steady-State Power Consumption: approximately 4.8 kW at 60 Hz

Helium Gas Specifications

  • Static Helium Pressure: approximately 1.60–1.65 MPa at 20°C
  • Operating High-Side Pressure: approximately 1.90–2.10 MPa
  • Gas Supply Connector: 1/2-inch coupling
  • Gas Return Connector: 1/2-inch coupling

Operating pressure may vary according to the connected cold-head heat load and ambient operating conditions. Physical Specifications

  • Width: approximately 520 mm
  • Length: approximately 520 mm
  • Height: approximately 901 mm
  • Weight: approximately 95 kg
  • Recommended Ambient Operating Temperature: 4–28°C

Compatible Cold Head Configuration The CNA-31C is documented for use with the Sumitomo RDK-305D cold head as part of an SRDK cryocooler configuration. Exact compatibility should still be confirmed using the existing compressor model, cold-head model, helium pressure specification and system configuration before replacement. Air-Cooled Configuration Unlike Sumitomo water-cooled compressor models, the CNA-31C uses an integrated air-cooling system for the helium gas and compressor lubrication circuit. Adequate airflow and installation clearance are required for proper operation. Maintenance The CNA-31C contains an oil-mist adsorber used to remove residual lubricating oil from the compressed helium gas.

  • Compressor Adsorber P/N: RE18ZN1005
  • Recommended Adsorber Replacement Interval: 30,000 operating hours

Periodic cleaning of the air-cooled heat exchanger is also recommended according to the operating environment. How to Identify the Correct Compressor Confirm CNA-31C on the existing compressor nameplate and verify:

  • Input voltage and frequency
  • Existing compressor P/N / reference number
  • Cold-head model
  • Helium pressure specification
  • MRI or cryogenic system model
  • Compressor nameplate information

Compatibility Confirmation Do not select a replacement compressor only by physical appearance. Compatibility should be confirmed using the compressor model, electrical configuration, cold-head model, helium pressure and complete cryogenic system configuration. What to Send for a Quote

  • MRI or cryogenic system manufacturer and model
  • Existing compressor model
  • Compressor nameplate photo
  • Input voltage and frequency
  • P/N / reference number, if available
  • Existing cold-head model
  • Cold-head nameplate photo
  • Required quantity

Warranty A standard 3-month warranty is available. Final warranty coverage and terms are confirmed in the quotation or sales agreement. Contact VISTAING MEDICAL for CNA-31C compressor identification, sourcing, compatibility confirmation and quotation.

Compatible Systems

Selected cryogenic and MRI systems using the Sumitomo CNA-31C helium compressor with compatible RDK-305D cold-head configurations. Compatibility should be confirmed by compressor model, electrical specification, cold-head model and system configuration.
Chat with us on WhatsApp

Inquiry Submitted Successfully!

Thank you for your inquiry. Our team will review your request and contact you with the available information.